NCR RealPOS 5967 - Connecting to a POS; DVI Connections (Video)

3-2 Chapter 3: Hardware Installation
Connecting to a POS
Thefollowingillustrationsshowthecableconnectionsforthe5967andahost
terminal.Therearetwocablesrequired.
 DVIorVGAcableforvideo
 PoweredUniversalSerialBus(USB)fordataandpower
Note: OptionalPowerBrickisavailablewhenUSBpowerisnotavailableonthe
hostterminal.AspecialUSBcableisusedfordatainth
iscase.
 ThereisastandardUSBportonthe5967thatcanbeusedforanadditionalUSB
device.
DVI Connections (Video)
ConnecttheVGACabletotheVGAconnectorsonboththe5967LCDandhost
terminal.
30305
DVI
DVI
497-0446721 - 1.0 m
(1432-C191-0010)
497-0446722 - 4.0 m
(1432-C191-0040)
