NCR RealPOS 5967 - Calibrating the Touch Screen

Chapter 6: Touch Screen Calibration – Windows 6-3
Calibrating the Touch Screen
Beforeperformingthecalibrationprocedurepleaseobservethefollowingguidelines
forproper/impropermethodsoftouchingthescreen.
 Facethemonitordirectly.
 Performthecalibrationintheposition(sittingorstanding)thatyounormally
expecttousethetouchscreen.
 Touchthecalibrationtargetfirmlyandpreciselywithyourfingertip.During
calib
ration,becarefultokeepyourfingernailsandotherfingersawayfromthe
touchscreenasyoutoucheachtarget.
 Thehandandcalibrationfingershouldbeperpendicular(straightup)fromthe
touch‐screenduringtouchdownandremovalofthecalibrationfinger.Keepthe
otherfingersclosedandawayfromthetouch‐screen.
27732

 DoNOTtouchthedisplayorbezelwithyourotherhand.
27733
