NCR RealPOS 5967 - Chapter 6: Touch Screen Calibration - Windows; Installing and Calibrating the Touch Screen; Installing the Driver

6
Chapter 6: Touch Screen Calibration – Windows
Installing and Calibrating the Touch Screen
BesuretoobserveforthefollowingTouchScreencalibrationguidelines:
 Recalibratethetouchscreenanytimethesystemhasbeendisassembledfor
servicing.
 ThelatestcalibrationsoftwarecanbedownloadedfromtheNCRwebsite.
http://www.ncr.com
1. Atthissite,selecttheSupporttab.
2. SelectDrivers and Patches
→
Retail Support Files
→
Retail Platform
Software
→
5967
3. DownloadtheMicrochipTouchDriver(version6.43dorlater).
Installing the Driver
Note: Ifyouhaveapreviousversionofanothertouchscreendriverloadedonyour
systemyoumustcompletelyremoveitusingtheControlPanelAdd/Removeprogram
beforecontinuingwiththisinstallationprocess.
1. ExtractthedriverinstallationfilesintotoaworkingdirectoryonthePOS
terminal.
2. RuntheSetup.exeprogramfromthisdirectory.
3. Welcomescreen>Next
4. LicenseAgreementscreen>Accept,Next