NCR RealPOS 5967 - Page 45

Chapter 6: Touch Screen Calibration – Windows 6-7
6. Touchthecenterofthetarget.Pullyourfingerafewinchesawayfromthescreen
whenyouseetheReleasemessage.

7. Repeattheprocessforeachtargetlocationastheyappear.
8. Afteralltargetshavebeentouchedatestscreendisplays.Touchthescreenin
variouslocationstoverifythecalibrationresults.SelectAcceptifyouaresatisfied
withtheresults.Ifnot,selectCancelandrepeattheprocess.
Note: DonottouchESCtoexitfromthisscreen.
