NAVIGATION
Additional Maps and Upgrades – Please visit www.ndrive.com
Technical Help – Please contact the helpline on 0844 557 9677
8.3.5 Points of Interest
Allows you to customise which POI categories will be shown on the map. Scroll through the list
and select the categories you would like to be shown. Categories which will be shown on the map
are shown with a tick in the right hand box. The default setting is for all categories to be shown.
Select to confirm your settings. You will be returned back to the Map Appearance
menu.
8.4 Routing Options
8.4.1 Routing Options
Allows you to change the way your route is calculated. You can chose from three available
options.
Use the + and – to change between each of the described below options.
Fastest – calculates the fastest route, regardless of the distance. It is highly recommended
that you select this option: the planned route will not only be the fastest, but also more
economic and pleasant to drive, since wider and faster roads such as motorways are given
priority.
Shortest – calculates the shortest route, regardless of the quality of the road. Note that this
route may take more time and some of the roads may be narrow or steep.
Pedestrian Mode –calculates your route using the shortest path available for walking or riding
a bicycle; routing calculation will not consider traffic signs and routing is limited to a 20km or
12.4 Mile distances.
Select to confirm your settings. You will be returned back to the Main Settings menu.
8.4.2 Tolls
Allows you to change if toll roads are to be included in the route calculation. Use the + and – to
change between yes and avoid.
Select Yes to allow toll roads to be used in the calculation.
Select Avoid to calculate a route which does not use toll roads.
Note - that even if you’ve selected the option Avoid, toll roads will still be considered, if there is no
other option for the route.
Select
to confirm your settings. You will be returned back to the Main Settings menu.
To Next Page
Loading...
