9 / 40
Safety Information | 9
CAUTION!
This product is a Class II medical device in the United States and Canada. No modifications
are allowed.
NOTE!
This equipment/system is intended for use by healthcare professionals only.
NOTE!
There are no user serviceable parts inside. Refer servicing to qualified service personnel.
WARNING!
Fire and shock hazard
Do not expose this product to rain or moisture.
WARNING!
Do not use this unit's polarized plug with an extension cord receptacle or other outlets un-
less the prongs can be fully inserted.
NOTE!
This product is designed to meet medical safety requirements for a patient vicinity device.
Hereby, NDS Surgical Imaging, LLC, declares that this ZEROWIRE® G2 System is in compliance with the essen-
tial requirements and other relevant provisions of Directive 2014/53/EU. The full text of the EU Declaration of
Conformity is available upon request.
Federal (USA) law restricts this device to sale by or on the order of a physician.
Radio
Approval
:
This device meets the requirements of Draft EN302 567 V2.0.24 and conforms to Radio and Equipment Direct-
ive (RED) 2014/53/EU.
FCC Identification:
UK2-SII-SK63102, UK2-SII-SK63101 or 2ASUJ-SII-SK63102, 2ASUJ-SII-SK63101
Industry Canada:
6705A-SIISK63102, 6705A-SIISK63101 or 25001-SIISK63102, 25001-SIISK63101
This product complies to the above standards only when used with an NDS supplied medical grade power
supply.
Model
ZEROWIRE® G2
Power Supply GlobTek GTM91120-3024-T3A
AC Input 100 to 240 Volts at 50 to 60 Hz
DC Output 24 volts at 1.25 amps
To Next Page
Loading...