NEC AT-35 - Receiving a Call using the Handset; Receiving a Call using Speakerphone; Switching between Handset and Speakerphone

BASIC OPERATION
Receiving a Call using the Handset
1. Pick up the handset when the phone rings.
2. Converse with your caller.
3. Replace the handset when you finish the call.
Ö Adjust the volume if needed using the Handset Volume Control Switch.
Receiving a Call using Speakerphone
1. Press the SPEAKER key when the phone rings.
2. Converse with your caller.
3. To end the call, press the SPEAKER key.
Ö Adjust the speaker volume if needed by pressing the VOLUME key.
Switching between Handset and Speakerphone
You can switch between speakerphone and handset while dialling a
number, waiting for answer, or at anytime during a call.
To change from Handset to Speakerphone:
1. Press the SPEAKER Key.
2. Replace the handset.
To change from Speakerphone to Handset.
1. Pick up the handset.
11