NEC DECT G355 - Getting Started: Initial Setup; Installing Battery Pack and Charger

Service Menu
25
Open the Service Menu
1.
2.
Give: service menu password
1
Auto Call Test
Use the Auto call test function to set-up calls from the DECT
handset automatically:
Open the Service Menu
1.
2.
3.
Give the number of the destination
4.
5.
Give the number of seconds the handset has to remain
“on-hook” before calling the destination
6.
7.
Give the number of seconds the handset has to remain
“off-hook”
8.
The handset will immediately call the destination, stay off-hook
for the indicated number of seconds, release the call by going on-
hook, wait for the “on-hook” number of seconds, and start from
the beginning.
1
If you do not have the password to access the handset’s service menu, please
obtain this from the NEC Support Helpdesk.