To Next Page

To Previous Page

Getting started

Installing the battery pack

1. Place the handset face down on a flat surface.

2. Slide the lock at the bottom of the battery

compartment cover upwards and at the same time lift

the cover away from the handset.

3. Remove the battery compartment cover.

4. Push the battery pack into the casing.

5. Replace the battery cover.

Installing the charger

1. Place the charger on a flat surface.

2. Connect the micro-B USB connector of the USB cable to

(the back of) the charger.

3. Connect the type A USB connector to the USB AC/DC

Adapter.

4. Connect the adapter to an electrical outlet.

5. Place the handset on the charger as shown in Figure 1.

Figure 1: I766 in Desktop Charger

Questions and Answers:

Need help?

Do you have a question about the NEC DECT I766 and is the answer not in the manual?

NEC DECT I766 Specifications

General