EasyManua.ls Logo

NEC DSX-34 - DSX System Administrator (PC Program)

NEC DSX-34
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Miscellaneous Cards and Optional Equipment
DSX Component Guide Components 23
Components
DSX System Administrator (PC Program)
The DSX System Administrator is a Windows
TM
-based application you can use for programming
the telephone system and maintaining site databases, instead of using the conventional telephone
programming. The System Administrator provides:
On-Line Programming (Direct Connection)
With the PC connected to the telephone system’s USB or Ethernet port, you can make imme-
diate changes to the telephone system programming. While connected, the System Adminis-
trator also allows you to save your new data to a le on the PC hard disk, or upload a
“template” database from your PC to the system.
Remote Programming
Using an IP or built-in modem connection between your PC and the remote system, you can
customize a customer’s system without leaving your ofce.
Off-Line Programming
With Off-Line Programming, the PC Program allows you to set up a database on your PC off
line, connect to the telephone system, and upload the entire custom conguration.
Database Save and Restore
Use the PC Program to save a site’s data to your PC hard disk. You can easily restore the saved
data later on, if required.
At a Glance
Free Download
Download the DSX System Administrator
from http://www.necdsx.com

Table of Contents

Related product manuals