24
To cancel Call Forward – Both Ring at a forwarding
station:
(1) Pick up the handset or press the Speaker key.
(2) Dial the Call Forward – Both Ring Service
Code (default: 745).
-OR-
(1) Press the Call Forwarding Programmable
Function Key (Service Code 751:14).
(2) Dial 0 (Cancel).
(3) Press the Speaker key or hang up.
Selectable Display Messaging
To select a message:
(1) Press the Speaker key.
(2) Press the Text Message key (Service Code
751:18 + 01~20).
(3) Use VOL UP or VOL DOWN keys to scroll
through the messages.
(4) For messages 1~8 and 10, enter digits to append
the message, if needed.
Note: You can append messages 1~8 and 10 with
digits (e.g. the time when you get back). You enter the
time in 24-hour format.
(5) Press Speaker to hang up.
Note: Intercom calls to extensions with Selectable
Display Messaging set will receive a DND signal and
receive the display message on their telephone’s display
instead of ringing the display.
Note: To allow calls to ring through and have the
message displayed on the calling extension’s display,
cancel DND by pressing the DND key + 0 (DND key
(Service Code 751: Code 03).
STA 12345678
IN MEETING UNTIL 08:48
List Dir ICM Prog
No. Message Change “#” to:
1 IN MEETING UNTIL ##:##
Time (when meeting is
done)
2 MEETING ROOM - #######
Room name or
extension
3 COME BACK ##:## Time (when returning)
4 PLEASE CALL ########### 11 digits (Tel. No.)
5 BUSY CALL AFTER ##:## Time (when returning)
6 OUT FOR LUNCH BACK ##:## Time (when returning)
7 BUSINESS TRIP BACK ##:## Date (when returning)
8 BUSINESS TRIP ##########
10 digits (where
reached)
9 GONE FOR THE DAY
10 ON VACATION UNTIL ##:## Date (when returning)
11~20 MESSAGE 11~20
To Next Page
Loading...
