NEC DT700 Series - Call Pickup (Direct); Timed Queuing (Outside Line Only); Outside Line Queuing (from Extension Dial Tone); Executive Override

38
Call Pickup (Direct)
 Lift handset.
 Press Call Pickup Direct key or dial Call Pickup Direct
access code (may be stored on one-touch key).
Called Calling
station party
PCK 2000 2001
4:26 PM TUE 12 FEB 2008
 Dial extension number to be picked up.
 Connection to calling party is established.
Outside Line Queuing
(From Extension Dial Tone)
If Outside Line Is Busy
 Press Speaker key or lift handset dial outgoing
access code (e.g.9).
SET
4:26 PM TUE 12 FEB 2008
 Receive a Busy indication. Press Call Back key. Call
is placed in queue for next available Outside Line.
 Replace handset.
 When Outside Line is available, setting station is
alerted by ringing and flashing red LED.
 Press Speaker key or lift handset. Dial tone is heard.
Dial desired number. (No outgoing access code
needed.
)
Timed Queuing
(Outside Line Only)
 Press Speaker key, receive dial tone.
 Dial Outside Line access code and desired number.
 Receive busy tone or ring no answer from distant
end.
 Press Call Back key, LED flashes, leave speaker on.
 The desired number is automatically be redialed.
 Pick up handset and converse.
NOTE: When station is in Timed Queue mode callers
receive busy indication.
Executive Override
If Called Station Is Busy
 Press Override key and converse.
Override
station Overridden
OVR 2000 2001
4:26 PM TUE 12 FEB 2008
NOTE: Interrupted parties receive a warning tone.