NEC DT750 - Page 100

94
• TO RESTORE PERSONAL SETTINGS
DT750 user can restore the personal settings of
DT750. To download the backup file to the telephone,
the DT750 needs to be connected to the network that
has FTP (TFTP server).
Before starting the download, the IP Address of the
FTP/TFTP Server must be entered from DT750.
STEP 1: Set up the FTP/TFTP server.
<FTP server>
Put the backup file you want to restore into
the designated directory (for Windows IIS,
the default is “C:\InetPub\ftproot) of the FTP
server.
<TFTP server>
Put the backup file you want to restore into a
desired directory of TFTP server and specify
it as the directory for downloading.
STEP 2: Display the Menu screen, and select Setting.
STEP 3: Select Data Backup/Restore.
Select an item by one of the following operations.
• Touch panel operation.
• Highlight an item by using , and press ,
or OK.
•Press .
STEP 4: Select Protocol.
Select an item by one of the following operations.
• Touch panel operation.
• Highlight an item by using , and press ,
or OK.
• Press .
STEP 5: Select a protocol used by the server which
stores the backup file.
Note
For details on the XML service, contact the System
Administrator.
3
3
TIP
Menu soft key is Back soft key for the firmware version
before 4.0.0.0.
Menu
OK
1
2
[Setting]
3
User Setting
1/1
↓
Download
Data Backup/Restore
4
4
↓
Back
OK
1
2
3
1/1
↓
4
Data Backup
Data Restore
Server Address
FTP Settings
Protocol
5
[Backup/Restore]