34
SETUP WITH FEATURE KEY
• MICROPHONE ON/OFF
STEP 1: LED on shows the status of the built-
in microphone.
STEP 2: Press soft key associated with the MIC Dis-
play or press and .
• CALL INDICATOR LAMP ON/OFF
You can choose to turn the call indicator lamp either on
or off during ringing.
STEP 1: Press and . The LCD displays:
• SELECT DIAL MODE
You can select one pattern from Normal, Dynamic Dial
Pad or Preset Dial to originate a call.
When only Dynamic Dial Pad is activated:
To Set/Reset Dynamic Dial Pad
STEP 1: Press and . The LCD displays:
Note
The call indicator lamp lights when used as Message
Waiting Lamp, even when it is turned off by the above
operation
TIP
When this feature is ON, you may initiate a call by
immediately dialing the number and the station will go
hands-free off-hook automatically. For details, see TO
ORIGINATE A CALL USING SELECTIVE DIALING
(DYNAMIC DIAL PAD, PRESET DIAL).
To Next Page
Loading...
