NEC DT750 - To Make an Internal Call

102
TO MAKE AN INTERNAL CALL
When dialed station number is registered in Personal
Directory, the corresponding name information will be
displayed on LCD while you are hearing a ringback
tone or are engaged in a conversation. According to
the initial settings, the display may differ from the fol-
lowing examples. For more information, contact the
system administrator.
STEP 1: Lift handset or press , and you will re-
ceive a dial tone.
STEP 2: Dial a desired station number. Display indi-
cates the dialed number.
(while hearing a ringback tone)
• When dialed station number is registered in Personal Di-
rectory
TIP
My Line is an actual line that is directly associated with
station number of the telephone. The user can make/
answer a call via this line. Usually, My line is seized
automatically only by lifting the handset or pressing
Speaker.
00:05
Elapsed Time
MIC DND >>>
Dialed Code
9XXXXXXXXX
+ Number
Note
This section describes the Normal Dial Mode. Regard-
ing the other mode, see
TO ORIGINATE A CALL
USING SELECTIVE DIALING (DYNAMIC DIAL
PAD, PRESET DIAL) .
Speaker
31313
Line Key which accommodates
My Line of the telephone
1:25 PM MON 12 JUL 2010
31313
Station Number
of My Line
Blink
MIC DND >>>