NEC DT750 - Incoming Call

37
Disable or Enable.
Select an item by one of the following operations.
• Touch panel operation.
• Highlight an item by using , and press or
OK.
• Press or , and press or OK.
• TO SET RINGING OF HEADSET
The procedure below shows how to enable/disable the
ringing of headset.
STEP 1: Display the Menu screen, and select Setting.
STEP 2: Select User Setting.
Select an item by one of the following operations.
• Touch panel operation.
• Highlight an item by using , and press ,
or OK.
• Press .
STEP 3: Select Incoming Call.
Select an item by one of the following operations.
• Touch panel operation.
• Highlight an item by using , and press ,
or OK.
• Press .
TIP
Default setting is Enable.
TIP
The enabled item is highlighted.
1
2
1
2
1
2
↓
1/1
Disable
OK
Back
Enable
[Offhook Ring]
TIP
Menu soft key is Back soft key for the firmware version
before 4.0.0.0.
1
1
↓
Menu
OK
1
2
Data Backup/Restore
[Setting]
3
Download
User Setting
1/1
1
1