162
STEP 5: Enter a new group name.
Enter a group name by using digits keys. After entering
the group name, press or OK.
STEP 6: Display returns to the Group screen. Make
sure that the new group name takes effect.
TO FIND A REGISTERED DATA
• To Search by Group Name
STEP 1: Open the Directory screen (see TO ADD
NEW DATA: STEP1 - STEP3.)
STEP 2: On the Directory screen, select Search.
Select an item by one of the following operations.
• Touch panel operation.
• Highlight an item by using , and press ,
or OK.
• Press .
STEP 3: Select Group.
Select an item by one of the following operations.
• Touch panel operation.
• Highlight an item by using , and press ,
or OK.
• Press .
Note
Up to 32 characters can be entered as a group name.
For details on character entry method, see HOW TO
INPUT CHARACTERS.
Note
You can set ringer tone (→ select 2 Ring Tone) and illu-
mination types (
→ select 3 Illumination) for calls routed
from the specific group here.
Ringer tone and illumination types can be set for
“Name”, “Group” and “Telephone set”. The ringer tone
and illumination types set for “Name” have higher prior-
ity than the types set for Group and Telephone set.
Also, the ringer tone and illumination types for Group
have higher priority than the types set for Terminal set.
To Next Page
Loading...
