NEC DT750 - Page 45

39
• TO SET RINGER TONE
The procedure below shows how to change the ringer
tone for internal call and external call.
STEP 1: Display the Menu screen, and select Setting.
STEP 2: Select User Setting.
Select an item by one of the following operations.
• Touch panel operation.
• Highlight an item by using , and press ,
or OK.
•Press .
STEP 3: Select Incoming Call.
Select an item by one of the following operations.
• Touch panel operation
• Highlight an item by using , and press ,
or OK.
•Press .
STEP 4: Select Ring Tone.
Select an item by one of the following operations.
• Touch panel operation.
• Highlight an item by using , and press ,
or OK.
• Press .
STEP 5: Select External Call when setting the
ringer tone for external calls. Select Inter-
nal Call when setting the ringer tone for inter-
nal calls.
TIP
Menu soft key is Back soft key for the firmware version
before 4.0.0.0.
1
1
↓
Menu
OK
1
2
Data Backup/Restore
[Setting]
3
Download
User Setting
1/1
1
1
OK
Back
1/1
[User Setting]
1
2
3
4
5
6
7
↓
Display
Change Password
Peripherals
Talk
Security
Incoming Call
Usability
4
4
OK
Back
1/1
[Incoming Call]
1
2
3
4
5
6
↓
Headset Ring Volume
Illumination
Ring Volume
Offhook Ring
Headset Ring
↓
Ring Tone
1
2