NEC DT750 - Page 48

42
• TO SET ILLUMINATION PATTERN FOR
CALL INDICATION LAMP
The procedure below shows how to set the illumination
pattern (color of Call Indicator Lamp).
STEP 1: Display the Menu screen, and select Setting.
STEP 2: Select User Setting.
Select an item by one of the following operations.
• Touch panel operation.
• Highlight an item by using , and press ,
or OK.
•Press .
STEP 3: Select Incoming Call.
Select an item by one of the following operations.
• Touch panel operation.
• Highlight an item by using , and press ,
or OK.
•Press .
STEP 4: Select Illumination.
Select an item by one of the following operations.
• Touch panel operation.
• Highlight an item by using , and press ,
or OK.
• Press .
STEP 5: Select External Call when setting the illu-
mination pattern for external calls. Select
Internal Call when setting the illumination
pattern for internal call.
TIP
Menu soft key is Back soft key for the firmware version
before 4.0.0.0.
1
1
↓
Menu
OK
1
2
Data Backup/Restore
[Setting]
3
Download
User Setting
1/1
1
1
OK
Back
1/1
[User Setting]
1
2
3
4
5
6
↓
Display
Change Password
Peripherals
Talk
Security
Incoming Call
7
Usability
5
5
OK
Back
1/1
[Incoming Call]
1
2
3
4
5
6
Headset Ring Volume
Ring Volume
Offhook Ring
Headset Ring
↓
Ring Tone
Illumination
1
2