NEC DT750 - Page 82

76
• TO SET USABILITY
The procedure below shows how to set the operation of Help key
while pop-up window is displayed.
STEP 1: Display the Menu screen, and select Setting.
STEP 2: Select User Setting.
Select an item by one of the following operations.
• Touch panel operation.
• Highlight an item by using , and press ,
or OK.
•Press .
STEP 3: Select Usability.
Select an item by one of the following operations.
• Touch panel operation.
• Highlight an item by using , and press ,
or OK.
•Press .
STEP 4: Select Help Key Mode.
Select an item by one of the following operations.
• Touch panel operation.
• Press or OK.
• Press .
Note
This feature is supported from Terminal Firmware Ver-
sion 5.0.0.0.
TIP
Menu soft key is Back soft key for the firmware version
before 4.0.0.0.
1
1
↓
Menu
OK
1
2
Data Backup/Restore
[Setting]
3
Download
User Setting
1/1
7
7
OK
Back
1/1
[User Setting]
1
2
3
4
5
6
7
↓
Peripherals
Usability
Security
Incoming Call
Talk
↓
Display
Change Password
1
1
OKCancel
1 Help Key Mode
1/1
[Usability]
↓