NEC Express5800 A2040b - Start the SAP HANA Instance

2.3. Start the SAP HANA Instance
1. Change the current directory ..
# cd /usr/sap/hostctrl/exe
2. Start the SAP HANA Instance.
Check the status “OK”.
 Instance No : “HANA>SAP HANA> Instance No.” on parameter sheet.
# ./sapcontrol –nr <instance no> -function Start
16.12.2013 XX:XX:XX
Start
OK
3. Check the SAP HANA Instance Status.
Check the all status “GREEN”
It takes some time after the sapcontrol command.
 Instance No : “HANA>SAP HANA> Instance No.” on parameter sheet.
# ./sapcontrol –nr <instance no> - function GetProcessList