NEC Express5800 A2040b - 3 Stop the Server; Stop the SAP HANA Instance; Power off the Server

3. Stop the Server
3.1. Stop the SAP HANA Instance
1. Change the current directory ..
# cd /usr/sap/hostctrl/exe
2. Stop the SAP HANA Instance.
Check the status “OK”.
 Instance No : “HANA>SAP HANA> Instance No.” on parameter sheet.
# ./sapcontrol –nr <instance no> -function Stop
16.12.2013 XX:XX:XX
Stop
OK
3. Check the SAP HANA Instance Status.
Check the all status “GREEN”
It takes some time after the sapcontrol command.
 Instance No : “HANA>SAP HANA> Instance No.” on parameter sheet.
# ./sapcontrol –nr <instance no> - function GetProcessList
3.2. Power off the server
1. Power off the server. Use the following command on terminal.
# shutdown –h now