NEC Express5800 Series Manual

Page.23
■ For B120e-h
3 1 (1) POST Error Message
Wrong: There is description of the next error messages in the table.
Correct: An error message of mentioning isn't shown to the line of the top.
Error Message Cause Solution
B311 IOV-SW Module 1 Slot 1 Failed to expand option ROM of
IOV-SW Module 1 slot 1.
B312 IOV-SW Module 1 Slot 2 Failed to expand option ROM of
IOV-SW Module 1 slot 2.
B313 IOV-SW Module 1 Slot 3 Failed to expand option ROM of
IOV-SW Module 1 slot 3.
B314 IOV-SW Module 1 Slot 4 Failed to expand option ROM of
IOV-SW Module 1 slot 4.
B321 IOV-SW Module 2 Slot 1 Failed to expand option ROM of
IOV-SW Module 2 slot 1.
Disable expansion of option
ROM of the board that is not
used for OS boot.
B322 IOV-SW Module 2 Slot 2 Failed to expand option ROM of
IOV-SW Module 2 slot 2.
B323 IOV-SW Module 2 Slot 3 Failed to expand option ROM of
IOV-SW Module 2 slot 3.
B324 IOV-SW Module 2 Slot 4 Failed to expand option ROM of
IOV-SW Module 2 slot 4.
Disable expansion of option
ROM of the board that is not
used for OS boot.

NEC Express5800 Series Specifications

General

Series	Express5800
Category	Server
Processor	Intel Xeon processors
Network	Gigabit Ethernet, 10 Gigabit Ethernet (Varies by model)
Operating System Support	Windows Server, Linux variants
Form Factor	Tower, Rackmount (1U, 2U, etc. - varies by model)
Memory	DDR4 ECC DIMM (Capacity varies by model)
Storage	SAS/SATA HDD/SSD, NVMe SSD (Configuration varies by model)