NEC GT210 - Making Calls Using IP Addresses

FW version 1.0.4.152
16
display a list of matched numbers and the user could select the number using the Up/Down key
and dial out.
 Redial. Redial the last dialed number.
1. Take handset off hook; or
Press SPEAKER key; or
Press HEADSET key with headset plugged in; or
Press an available LINE key to activate speaker; or
When the phone is in idle.
2. Press SEND key, or the REDIAL soft key.
 Via Call History. Dial the number logged in phone's call history.
1. Press MENU key to bring up the main menu.
2. Enter Call History.
3. Select the entry you would like to call using the navigation arrow keys.
4. Press SEND key to dial out.
 Via Contacts. Dial the number from the Contacts.
1. Press MENU key to bring up the main menu.
2. Enter "Contacts" using the navigation arrow keys..
3. Under Contacts, enter Local Phonebook using the navigation arrow key.
4. Select the contact you would like to call using the navigation arrow key.
5. Press SEND key to dial the selected contact.
Note: Broadsoft Phonebook is not available.
 Speed Dial from Line Key. Dial the number configured as Speed Dial on LINE Key.
1. Go to phone's Web GUISettingsProgrammable KeysProgrammable Keys,
configure the LINE Key's Key Mode as Speed Dial. Select the account to dial from, enter the
Name and User ID (the number to be dialed out) for the LINE Key. Click on "Save and
Apply" at the bottom of the Web GUI page.
2. Go off hook on the phone, or directly press the Speed Dial key to dial out.
 Call Return. Dial the last answered call.
1. Go to phone's Web GUISettingsProgrammable KeysProgrammable Keys,
configure the LINE Key's Key Mode as Call Return. Select the account to dial from, no
Name or User ID has to be set on for Call Return.
2. Go off hook on the phone, or directly press the Call Return key to dial out.