NEC GT210 - CONNECTING TO DEVICES; EHS Headset

FW version 1.0.4.152
23
[3C/SIP@NET]
1. During the conference, press HOLD key. The conference call will be split and the calls will
be put on hold separately on the 2 LINE keys blinking in green;
2. Select one LINE key and press to resume the 2-way conversation;
3. If user is a conference organizer, and would like to re-establish conference call, press a
“ReConf” softkey. If users are participant of conference, and would like to re-establish
conference call, press HOLD key or blinking LINE key.
 End Conference.
Users could press the “EndCall” softkey or simply hang up the call to terminate the conference
call. If the remote party hangs up the call itself, it will be disconnected from the conference but
other parties on GT210 will stay in the existed conference.
Notes [3C/SIP@NET]:
 The party that starts the conference call has to remain in the conference for its entire duration, you
can put the party on mute but it must remain in the conversation.
 The option "Disable Conference" has to be set to "No" to establish conference.
 For 3-party conference, if the host hangs up the phone the conference will end. If users want to keep
the other 2 parties in conference after the host hangs up, go to Web GUIAccountsAccount
1Call SettingsTransfer on conference Hangup, check "Yes" and save the change.
Voicemail
A blinking red LED indicator on the top right corner of the GT210 indicates a message is
waiting. Go to Web GUIAccountsAccount 1General Settings to configure Voice Mail
Access Number.
To retrieve the voicemail:
1. Press MESSAGE key to dial into the voicemail box.
2. Select the account and confirm to access the dial-up interface, make operations according
to the voice prompt.
3. Enter the account and password which is configured on SIP PBX.