NEC GT210 - Voicemail

FW version 1.0.4.152
22
2. If users would like to resume conference call, press HOLD key or blinking LINE key.
Notes: This function is not available with SV9300.
[3C/SIP@NET]
1. During the conference, press HOLD key. The conference call will be split and the calls will
be put on hold separately on the 2 LINE keys blinking in green;
2. Select one LINE key and press to resume the 2-way conversation;
3. If user is a conference organizer, and would like to re-establish conference call, press a
“ReConf” softkey. Also, if users are participant of conference, and would like to re-establish
conference call, press HOLD key or blinking LINE key.
 End Conference.
Users could press the “EndCall” softkey or simply hang up the call to terminate the conference
call.
Easy Conference M ode
GT210 supports Easy Conference Mode, which can be used combined with the traditional way to
establish the conference.
 Initiate a conference call.
1. Establish 1 call.
2. Press CONFERENCE key and a new line will be brought up using the same account.
3. Dial the number and press SEND key to establish the second call.
4. Press CONFERENCE key or press the “ConfCall” softkey to establish the conference.
 Cancel Conference.
1. If users decide not to conference after establishing the second call, press EndCall softkey
instead of the “ConfCall” softkey/CONFERENCE key.
2. This will end the second call and the screen will show the first call on hold.
Notes:
 For SV9300, when “EndCall” softkey is pressed, transfer will be performed.
 Hold and Re-conference.
[SV9500/SV9100/SL2100/SL1000/SL1100]
1. During the conference, press HOLD key.
2. If users would like to resume conference call, press HOLD key or blinking LINE key.
Notes: This function is not available with SV9300.