FW version 1.0.4.152
20
During A Phone Call
Call Hold
Hold. Place a call on hold by pressing the HOLD key. The active LINE key will blink in green.
Resume. Resume call by pressing the blinking LINE key.
Mute
During an active call, press the MUTE key to mute/unmute the microphone. The LCD will show the Mute
icon on the screen when the call is muted.
Group Listening with Speaker
If the option g with Speakerng with Speaker is enabled on the Web GUI (refer to the administration
guide), the phone will display a softkey during the call to enable speaker listening along with handset
or headset.
Call Transfer
GT210 supports Blind Transfer, Attended Transfer
and Auto-Attended Transfer.
Blind Transfer.
1. During the first active call, press TRANSFER key and dial the number to transfer to.
2. Press SEND key or # to complete transfer of active call.
Attended Transfer.
[SV9500]
1. During the first active call, press idle LINE key. The first call will be put on hold.
2. Enter the number for the second call in the new line and establish the call.
3. Press TRANSFER key.
[SV9300]
1. During the first active call, press idle LINE key. The first call will be put on hold.
2. Enter the number for the second call on the new line and establish the call.
3. Hang up the call. The call will be transferred.
[SV9100/SL2100/SL1000/SL1100/3C/SIP@NET]
1. During the first active call, press idle LINE key. The first call will be put on hold.
2. Enter the number for the second call on the new line and establish the call.
3. Press TRANSFER key.
4. Press the LINE key which is on hold to transfer the call.
To Next Page
Loading...
