NEC America, Inc., Corporate Networks Group
4 Forest Parkway, Shelton, CT 06484
TEL: 203-926-5400 FAX: 203-929-0535
cng.nec.com
To program: In an idle state, + + + Key + Code +
Optional Data + CLEAR.
FTCNMOREPROG
For Exclusive Hold, enter 1044.
Hold:
Enter 1080 for Call Forwarding to extension or Voice Mail
(the same as dialing ✻ 2).
Enter 1081 for Selectable Display Messaging, Call Forwarding
Off Premise and Personal Greeting/Park and Page (the same as
dialing ✻ 4).
Call Forwarding:
Enter 1016 if you want a Conference key.
Conference:
Enter 1082.
Directory Dialing:
Enter 1058 + Partner’s extension.
Hotline:
Enter 0001 - 0192 for lines, 0000 to undefine.
Enter 1078 + 0 (Incoming), 1 (Outgoing) or 2 (Both) + 001-128
(Trunk Group) or 000 (for ARS).
Line and Loop Keys:
Enter 1014.
Save Number Dialed:
Enter 1075.
Repeat Redial:
Method A
1
: Enter 1059.
Method B
1
: Enter 1059 + Your extension number.
1
Check with your communications manager.
Voice Mail:
Enter 1015.
Memo Dial:
Enter 1033 + Orbit number (1-64).
Park:
Enter 1006 + Zone (1-64) for Internal.
Enter 1004 + Zone (1-8) for External.
Enter 1005 for Combined (External and Internal) All Call.
Page:
Programming Function Keys
To program: In an idle state, + + Key + Number + HOLD + Name
(see Entering Names under Abbreviated Dialing) + HOLD + CLEAR.
ONETPROG
Enter Co-worker’s extension number + SPK to hang up.
DSS:
Enter 9 + Outside number or
Enter 804 + Line group number (1-9, 01-99 or 001-128) +
Outside number or
Enter #9 + Line number (e.g., 05 or 005) + Outside number
+ SPK to hang up.
Personal Speed Dial:
Enter Service Code + SPK to hang up. For example, you can
make a Save Number Clear key by entering 885.
Service Codes:
Programming One-Touch Keys
To Previous Page
Loading...
Need help?
General
