126
8. Appendix
Specifications
This section provides technical information about the LT265/LT245 Projector's performance.
Model Number LT265/LT245
Optical
DMD™ Single Chip Digital Micromirror Device (DMD™)
Resolution 1024 ⳯ 768 pixels* up to UXGA with Advanced AccuBlend
Lens Manual zoom and focus:
LT265: F2.1 - 2.3 f=28.2mm - 33.6mm
LT245: F2.2 - 2.5 f=22.1mm - 26.5mm
Lamp 220 W DC standard
Image Size 30 inches - 500 inches (0.8 m - 12.7 m) diagonal
Projection Distance LT265: 3.8ft - 80.7ft / 1.20m - 24.5m
LT245: 2.95ft - 62.3ft / 0.90m - 19.1m
Projection Angle LT265: 14.8°-15.4°(wide) / 12.3°-12.7°(tele)
LT245: 18.5°-19.4°(wide) / 15.6°-16.2°(tele)
Electrical
Inputs 2 RGB (Mini D-Sub 15p), 1 S-Video (Mini DIN 4p), 1 Video, 1 PC Card,
1 Stereo Mini Audio, 1 (L/R) RCA Audio, 1 PC Control (Mini DIN 8p)
Outputs 1 RGB (Mini D-Sub 15p), 1 Stereo Mini Audio
USB Port 1 A Type
LAN Port RJ-45
Video Compatibility NTSC, NTSC4.43, PAL, PAL-60, PAL-N, PAL-M, SECAM, 1080i, 720p,
576p, 576i, 480p, 480i (w/optional cable)
Scan Rate Horizontal: 15 kHz to 100 kHz (RGB: 24 kHz or over)
Vertical: 48 Hz to 120 Hz
Video Bandwidth RGB: 100 MHz (-3dB)
Pixel Clock Freq Less than 135 MHz
Color Reproduction 16.7 million colors simultaneously, Full color
Horizontal Resolution NTSC / NTSC4.43/PAL / YCbCr: 540 TV lines
SECAM: 300 TV lines
RGB: 1024 dots (H) ⳯ 768 dots (V)
External Control RS232, IR, LAN, USB
Sync Compatibility Separate Sync / Composite Sync / Sync on G
Built-in Speakers 2W ⳯ 1 (monaural)
Power Requirement 100 - 240V AC, 50/60Hz
Input Current 3.1 - 1.4A
Power Consumption 290W in Lamp Normal mode
240W in Lamp Eco mode
12W in Standby mode
* Effective pixels are more than 99.99%.
To Next Page
Loading...
