66
6. Using On-Screen Menu
쐏 Menu Descriptions & Functions [Source]
Computer 1 and 2
Selects the computer connected to your COMPUTER 1 or COMPUTER 2 input connector signal.
NOTE: An optional component cable (Component V or ADP-CV1 cable) is needed for a component signal.
Computer 3 (LT380 only)
Selects the computer connected to your COMPUTER 3 (DVI-D) connector.
Component
Selects what is connected to your COMPONENT IN (Y, Cb/Pb, Cr/Pr).
Video
Selects what is connected to your VIDEO input-VCR, laser disc player, DVD player or document camera.
S-Video
Selects what is connected to your S-VIDEO input-VCR, DVD player, or laser disc player.
NOTE: A frame may freeze for a brief period of time when a video is played back in fast-forward or fast-rewind with a Video or S-
Video source.
Viewer
This feature enables you to make presentations using a PC card that contains captured images and slides created
with the exclusive Photo Explore 8.0 for NEC contained on the CD-ROM. See the supplied NEC Software Utility
Installation Guide for installing the Photo Explore 8.0 for NEC.
See page 56 for viewing slides.
LAN
Selects a signal from the LAN port (RJ-45) or the NEC optional wireless LAN card plugged into the projector's card
slot.
To Next Page
Loading...
