EasyManua.ls Logo

NEC M283X - Setting up the Projector for a Wireless LAN Connection (with the Optional USB Wireless LAN Unit Equipped) [WIRLESS LAN]

NEC M283X
166 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
110
5. Using On-Screen Menu
Setting up the Projector for a Wireless LAN Connection (with the optional USB Wireless
LAN Unit equipped) [WIRLESS LAN]
Important
• Consultwithyournetworkadministratoraboutthesesettings.
• WhenusingawirelessLANconnection,attachtheoptionalUSBWirelessLANtotheprojector.(page129)
[PROFILE] [DISABLE] WirelessLANconnectionwillbeturnedoff
[SIMPLEACCESS
POINT]
Settheprojectorforsimpleaccesspoint.
Selecting[SIMPLEACCESSPOINT]willallowtheprojec-
tortocreateaninfrastructurenetwork.TheIPaddressof
theprojectorwillbesetautomatically.
Select"ObtainanIPAddressAutomatically"tosettheIP
addressofaconnectedcomputer.
[PROFILE1] UptotwosettingsfortheUSBwirelessLANunitcanbe
storedinmemoryoftheprojector.(page48)
Torecallthesettingsfrommemory,select[PROFILE1]or
[PROFILE2]from[PROFILE].
[PROFILE2]
[RECONNECT] Retrytoconnecttheprojectortoanetwork.Trythisifyouhavechanged[PROFILE].
Whenyouconnectwithyourcomputertosaveyourproleandselect"Automaticallyconnectwhenwithinrange"from
thePropertiestabofWirelessNetworkinWindowsforyourselectedprole,yourwirelessLANwillbeaccessedunder
thefollowingconditions:
• atthetimeofturningonthecomputerortheprojector
• whenthenotebooktypeiswithintherangeoftheprojector'swirelessLANcanbeachieved.
DatatransmissionbetweenwirelessLANandwiredLANisnotpossible.
Inthe[SIMPLEACCESSPOINT]mode,youcanconnectupto20terminals.
However,recommendednumberofterminalsisapprox.10fornormaloperation.

Table of Contents

Other manuals for NEC M283X

Related product manuals