NEC M362W - Projecting an Image (Basic Operation); Basic Projection Setup

15
Thissectiondescribeshowtoturnontheprojectorandtoprojectapictureontothescreen.
❶ Flow of Projecting an Image
Step 1
• Connectingyourcomputer/Connectingthepowercord(→page16)
Step 2
• Turningontheprojector(→page17)
Step 3
• Selectingasource(→page19)
Step 4
• Adjustingthepicturesizeandposition(→page20)
• Correctingkeystonedistortion[KEYSTONE](→page24)
Step 5
• Adjustingapictureandsound
- Optimizing a computer signal automatically (→ page 28)
- Turning up or down volume (→ page 28)
Step 6
• Makingapresentation
Step 7
• Turningofftheprojector(→page29)
Step 8
• Afteruse(→page30)
2. Projecting an Image (Basic Operation)