NEC M362W - ❻ Using the Computer Cable (VGA) to Operate the Projector (Virtual Remote Tool)

38
3. Convenient Features
❻ Using the Computer Cable (VGA) to Operate the
Projector (Virtual Remote Tool)
Usingtheutilitysoftware“VirtualRemoteTool”includedonthecompanionNECProjectorCD-ROM,VirtualRemote
screen(ortoolbar)canbedisplayedonyourcomputerscreen.
Thiswillhelpyouperformoperationssuchasprojector’spoweronoroffandsignalselectionviathecomputercable
(VGA),serialcable,orLANconnection.
Control Functions
PowerOn/Off,signalselection,picturefreeze,picturemute,audiomute,andremotecontroloperationonyour
PC.
VirtualRemotescreen Toolbar
ThissectionprovidesanoutlineofpreparationforuseofVirtualRemoteTool.
ForinformationonhowtouseVirtualRemoteTool,seeHelpofVirtualRemoteTool.(→page43)
Step1:InstallVirtualRemoteToolonthecomputer.(→page39)
Step2:Connecttheprojectortothecomputer.(→page41)
Step3:StartVirtualRemoteTool.(→page42)
TIP:
• VirtualRemoteToolcanbeusedwithaLANandaserialconnection.USBconnectionisnotsupportedbyVirtualRemoteTool.
• ForupdateinformationonVirtualRemoteTool,visitourwebsite:
 http://www.nec-display.com/dl/en/index.html