NEC ME401W - Page 109

98
6. Installation and Connections
ConnectionExample(1)[SMARTCONNECTION]
Easily connect the projector to multiple terminals as computers
andsmartphonesbyPINcode.
1. Downloadtheapplicationsoftware,“MultiPresenter”fromourcompanywebsiteandinstallitontoeach
terminal as a computer.
http://www.nec-display.com/dl/en/soft/multipresenter/index.html
2. Power ON the projector and display on the on-screen menu and then select as the bellows in order:
[SETUP] →[WIRELESSLAN]→[SMARTCONNECTION]for[PROFILE]
3. Switchthesourceoftheprojectorto[LAN].
The stand-by screen will be displayed on.
4. Launchtheapplicationsoftware“MultiPresenter”oneachterminalandinputPINCODEthatisshownon
the stand-by screen.
* ForiOS,selectSSIDinadvanceandinputtheSECURITYKEY.
• PerformdetailsettingsfortheSMARTCONNECTIONactivatingtheHTTPServerfunction.(→page40)
• AboutdetailsoftheMultiPresenterapplication,pleaserefertothemanualofMultiPresenteruploadedonourcom-
pany web site.
ConnectionExample(2)[SIMPLEACCESSPOINT]
SettheprojectorasSIMPLEACCESSPOINTforconnectingtoterminalsascomputersandsmartphones.