NEC ME401W - ❸ Turning On The Projector

12
2. Projecting an Image (Basic Operation)
❸ Turning on the Projector
1. Remove the lens cap.
Press and hold the two dent part on the lens cap and pull
it toward you.
2. Press the (POWER) button on the projector cabinet
or the POWER ON button on the remote control.
 The POWER indicator will blink and the projector will
become ready to use.
TIP:
• Whenthemessage“Projectorislocked!Enteryourpassword.”
isdisplayed,itmeansthatthe[SECURITY]featureisturnedon.
(→page31)
After you turn on your projector, ensure that the computer
or video source is turned on.
NOTE:Whennoinputsignalispresent,theno-signalguidanceis
displayed(factorymenusetting).
(→page108)
Standby Blinking Power On
Steady red light Blinking blue
light
Steady blue
light