NEC ME401W - Page 129

118
8. Appendix
NOTE:
• When[COMPUTER]isselectedfromyoursourceselection,theVirtualRemotescreenorthetoolbarwillbedisplayedaswellas
yourcomputerscreen.
• Usethesuppliedcomputercable(VGA)toconnecttheCOMPUTERINterminaldirectlywiththemonitoroutputterminalofthe
computertouseVirtualRemoteTool.
 Usingaswitcherorothercablesthanthesuppliedcomputercable(VGA)maycausefailureinsignalcommunication.
 VGAcableterminal:
 PinNos.12and15arerequiredforDDC/CI.
• VirtualRemoteToolmaynotworkdependingonyourcomputer’sspecicationsandversionofgraphicadaptersordrivers.
• TorunVirtualRemoteToolonWindows8.1,Windows8andWindowsXP,“Microsoft.NETFrameworkVersion2.0”isrequired.
TheMicrosoft.NETFrameworkVersion2.0,3.0or3.5isavailablefromMicrosoft’swebpage.Downloadandinstallitonyour
computer.
• Logodata(graphics)thatcanbesenttotheprojectorwithVirtualRemoteToolhasthefollowingrestrictions:
 (OnlyviaserialorLANconnection)
- Filesize:Lessthan1MB
- Imagesize(resolution):
 ME401W/ME361W/ME331W/ME301W:Horizontal1280×vertical800dotsorless
 ME401X/ME361X/ME331X/ME301X:Horizontal1024×vertical768dotsorless
- Numberofcolors:256colorsorless
• Toputthedefault"NEClogo"backinthebackgroundlogo,youneedtoregisteritasthebackgroundlogobyusingtheimagele
(ME401W/ME361W/ME331W/ME301W:/Logo/necpj_bbwx.bmp,ME401X/ME361X/ME331X/ME301X:/Logo/necpj_bb_x.bmp)
incluldedonthesuppliedNECProjectorCD-ROM.
TIP:
• VirtualRemoteToolcanbeusedwithaLANandaserialconnection.USBconnectionisnotsupportedbyVirtualRemoteTool.
• Theprojector’s COMPUTERIN terminal supportsDDC/CI (Display DataChannelCommand Interface). DDC/CI is astandard
interfaceforbidirectionalcommunicationbetweendisplay/projectorandcomputer.