12
2. Projecting an Image (Basic Operation)
❹ Selecting a Source
Selecting the computer or video source
NOTE: Turn on the computer or video source equipment connected to the projector.
Detecting the Signal Automatically
Press the INPUT button once. The projector will search for the available
input source and display it. The input source will change as follows:
Computer →HDMI1 → HDMI2 → Video → USB-A → LAN
• With the INPUT screen displayed, you can press the
▼
▼ button to
select the input source.
TIP: If no input signal is present, the input will be skipped.
Using the Remote Control
Press any one of the Computer, HDMI1, HDMI2, Video, USB-A, or APPS
buttons.
Computer
HDMI 1
HDMI 2
Video
USB-A
LAN
To Next Page
Loading...
