36
5. Using On-Screen Menu
6 Menu Descriptions & Functions [Setting]
The projector has setting fuction, you can select other functions as described below.
Menu operation
Press < MENU > button on the remote controller or on the top control panel to display the OSD menu.Press ▲ ▼
button to select the setting menu ,then press <ENTER> or ▶ button.
1) Press ▲ ▼ button to select reqiured item.
2) Press <ENTER> button.
3) Press ▲ ▼ button to set options.
Setting
On start
Standby mode
High altitude
ECO mode
Cooling fast
Closed caption
Key lock
lris
Baud rate
Sound
HDMI setup
Off
Normal
Normal
Off
Normal
Off
Off
Off
19200
[On start]
Set the power mode on , when the power cord is connected to a power outlet.
1) Press ▲ ▼ button to select [ On start ] menu.
2) Press <ENTER> button.
3) Press ▲ ▼ button to select reqiured item.
Off...... Get into standby mode.
On.......Start up immediately.
Setting
Standby mode
High altitude
ECO mode
Cooling fast
Closed caption
Key lock
lris
Baud rate
Sound
Off
Normal
Normal
Off
Normal
Off
Off
Off
19200
On start
HDMI setup
To Next Page
Loading...
