60
6. Network control
① Brightness：Adjust the brightness of the projected image.
② Contrast：Adjust the contrast of the projected image.
③ Sharpness：Adjust the sharpness of the projected image.
④ Color Temperature：Adjust the color temperature of the projected image.
❻ [Image setup] page
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
① Aspect: Switch the aspect ratio of the projected image.
② Fine sync: Adjust the phase of the projected image.
③ H position: Adjust the horizontal position of the projected image.
④ V position: Adjust the vertical position of the projected image.
⑤ H. size: Adjust the horizontal dimension of the projected image.
⑥ Freeze: Select the function to switch the screen freeze on and off.
⑦ Auto PC adj.: Implement the automatic computer adjustment function.
⑧ V keystone: Correct trapezoidal distortion in vertical direction.
⑨ H keystone: Correc horizontal distortion in horizontal direction.
⑩ Corner correction: Correct four angles of the projected image.
To Next Page
Loading...
