To Next Page

To Previous Page

Quick Start

The following chart summarises the connection process for the

MultiSync P750.

For more details please turn to the following pages if you are connecting

to an IBM compatible, Macintosh compatible or other systems.

Is the computer a Power Macintosh

6100/60?

Use the Apple HDI-45

cable adapter to attach the

monitors signal cable to the

Macintosh video output.

Attach the signal cable of the moni-

tor to the video board/Apple adapter.

Connect the power cord of the

monitor to the power outlet and to

the monitor itself.

Turn monitor and computer on.

If necessary, use the OSM controls

for personal preference of the image.

Is the image correct?

Enjoy your monitor.

Problem solved?

Call your NEC-Dealer

Yes

See the Trouble Shooting section

Is the BNC Input being used?

Set the D-SUB/BNC switch to the

down (push in) position.

Set the D-SUB/BNC switch to

the up (raised) position.

Yes

E - 8 Quick Start

NEC MultiSync P750 User Manual

Questions and Answers: