NEC NP-17CU01 - Page 50

50
4. Using Menus
4-3. Title Select
4-3-1. Title select (Title Memory)
Selects the title of the signal to be projected.
You can register up to 100 titles. You can also assign registered titles to the preset buttons (<1> to <8> buttons) on the projec-
tor’s control panel and call them up directly using those buttons.
Request your dealer/distributor for details on registering and changing titles.
←Displaysthecurrentlyselecteditemwithasterisk(*).
← Selects the title to be projected.
4-3-2. Test Pattern
Selects the test pattern to be projected.
←Displaysthecurrentlyselecteditemwithasterisk(*).
← Selects the test pattern to be projected.
OFF, Alignment, Cross Hatch, Convergence, Red, Green, Blue, White, Black,
White 50% [IRE], H-Ramp, Logo