NEC NP-17CU01 - Title Setup; Information

56
4. Using Menus
4-6-8. Setup Date
Displays the date when the projector was set up (starting date of the warranty period).
← Displays the date when the projector was set up (starting date of the warranty
period).
4-6-9. Option Status
Displays the link status of the device mounted in slot on the projector. The device name is displayed in ( ) when the projector
is in standby or when connection to the device cannot be confirmed.
← Displays the link status of the device in slot.
• NP-90MS:NP-90MS02
• <VendorName>IMB:Mediablock
• NoBoard:Nodevicemounted