NEC NP-PH1000U - Page 183

169
6. Installation and Connections
1. Pressthe buttontosettheprojectortothestandbymode,then
turnoffthemainpowerswitch.
2. Removetheplate(portcover).
 Loosenthescrewsecurityportcover.
• Thescrewisnotremovable.
3. Slowly insert the wireless LAN unit into the USB (LAN) port
( ).
- RemovethewirelessLANunit’scap,settheunitwiththefront(the
sidewith the indicator) facingupwards,hold the backedge and
inserttheunitgently.
 Next,pressthewirelessLANunitinwithanger.
- ThecapyouhaveremovedwillbeusedwhenthewirelessLANunit
isremoved,sostoreitinasafeplace.
NOTE:IfthewirelessLANunitishardtoinsert,donotpushitinbyforce.
4. Attachtheanti-theftcapforwirelessLANunit.
 UsethescrewyouremovedatStep2tosecuretheanti-theftcap.
Plate
Anti-theft cap