To Next Page
M
Michael NelsonAug 11, 2025
What to do if my NEC Projector is in standby mode?
- GgonzalesisaacAug 11, 2025
If the NEC Projector is in standby mode, simply wait for it to power on.
What to do if my NEC Projector is in standby mode?
If the NEC Projector is in standby mode, simply wait for it to power on.
What to do if my NEC NP-PA703UL is in sleep mode?
If your NEC Projector is in sleep mode, wake it up using either the remote control or the control panel on the device.
What to do if my NEC Projector is in standby, though the network is available?
If your NEC Projector is in standby mode, wait for it to power on.
What to do when the program timer is activated on my NEC Projector?
If the program timer is activated on your NEC Projector while it's in standby, allow the program timer to complete its cycle.
What does it mean when my NEC Projector's LIGHT MODE is NORMAL or ECO1?
When your NEC Projector's LIGHT MODE is set to NORMAL or ECO1, it indicates normal operation. No action is needed.
What does it mean when my NEC Projector's LIGHT MODE is ECO2 or LONG LIFE?
If your NEC Projector's LIGHT MODE is set to ECO2 or LONG LIFE, it means it's operating normally. No action is required.
General| Brightness | 7000 ANSI Lumens |
|---|---|
| Resolution | 1920 x 1200 (WUXGA) |
| Display Technology | DLP |
| Light Source | Laser |
| Zoom | 1.6x |
| Control | RS-232C, LAN, USB |
| Speaker | 10W |
| Lamp Life | 20, 000 hours |
| Input Connectors | HDMI, DisplayPort |
| Output Connectors | HDMI, 3.5mm Audio Out |
| Networking | LAN (RJ45) |
| Keystone Correction | Vertical: ±30 degrees, Horizontal: ±30 degrees |
