144
6. Connecting to Other Equipment
Connecting Component Input
• Select the source name for its appropriate input connector after turning on the projector.
Input connector INPUT button on the projector
cabinet
Button on the remote control
COMPUTER IN
4:COMPUTER
4/COMPUTER
NOTE:
• When the signal format is set to [AUTO] (default factory setting when shipped), the computer signal and component signal are
automatically distinguished and switched. If the signals cannot be distinguished, select [COMPONENT] under [ADJUST] →
[VIDEO] → [SIGNAL TYPE] in the on-screen menu of the projector.
• To connect to a video device with a D connector, use the sold separately D connector converter adapter (model ADP-DT1E).
COMPUTER IN
15-pin - to - RCA (female) × 3 cable
adapter (ADP-CV1E)
Stereo mini plug - to - RCA audio cable (not
supplied)
Component video RCA × 3 cable
(not supplied)
Blu-ray player
Audio Equipment
To Next Page
Loading...
