22
2. Projecting an Image (Basic Operation)
TIP:
• The diagram below shows the lens shift adjustment range (orientation: desk/front).
100％V
50
％V
10
％V
100
％H
20
％H
20
％H
10％H10％H
Height of projected image
Width of projected image
Description of symbols: V indicates vertical (height of the projected image), H indicates horizontal (width of the projected image).
Focus
Recommend to perform the focus adjustment after leaving the projector under the state the TEST PATTERN has
been projected for over 30 minutes.
Please refer to page 85 in the User’s Manual about the TEST PATTERN.
To Next Page
Loading...
