NEC NP-PX800X User Manual

======================================================================
Control Commands for NEC Projector (Basic) Rev 11.03.11a
Copyright (C) NEC Display Solutions, Ltd. 2002-2011
----------------------------------------------------------------------
Updated on November 03, 2011
----------------------------------------------------------------------
This file contains information about NEC projector control commands.
Model Name
GT60 : GT5000/GT6000 Series
GT50 : GT1150/GT2150 Series
HT : HT1000/HT1100 Series
HT10 : HT410/HT510 Series
LT180 LT180
LT30 : LT25/LT30/LT35 Series
LT : LT220/LT240/LT240K/LT260/LT260K/LT245/LT265 Series
LT80 : LT280/LT380 Series
MT70 : MT860/MT1060/MT1065/MT1075 Series
NP60 : NP40/NP50/NP60 Series
NP62 : NP41/NP61/NP62 Series
NP1000 : NP1000/NP2000 Series
NP3150 : NP1150/NP2150/NP3150/NP3151W Series
NP4000 : NP4000/NP4001 Series
NP905 : NP905/NP901W/VT800 Series
NP600 : NP300/NP400/NP500/NP500W/NP500WS/NP600/NP600S Series
VT : VT770 Series
VT70 : VT37/VT47/VT480/VT57/VT570/VT575/VT670/VT676 Series
VT80 : VT48/VT480/VT580 Series
VT90 : VT49/VT490/VT590/VT595/VT695 Series
VT700 : VT700
WT : WT600/WT610/WT615 Series
NP4100 : NP4100/NP4100W Series
NP3250 : NP1250/NP2250/NP3250/NP3250W Series
NP610 : NP310/NP410/NP410W/NP510/NP510W/NP510WS/NP610/NP610S Series
NP2200 : NP1200/NP2200 Series
NP216 : NP110/NP115/NP215/NP216 Series
NP64 : NP43/NP64 Series
M300 : M260X/M260W/M300X/M300W Series
P420 : P350X/P350W/P420X Series
U300 : U300X/U310W Series
V300 : V260/V260X/V300X/V300W Series
PA600 : PA600X/PA550W/PA500U/PA500X
PX750U PX750U Series

NEC NP-PX800X Specifications

General

Brightness	8000 ANSI Lumens
Resolution	1024 x 768
Contrast Ratio	2100:1
Weight	23.6 lbs
Max Resolution	1920 x 1200
Display Technology	DLP
Lamp Life (Normal)	2000 hours
Input Connectors	HDMI, VGA, Composite, S-Video, USB
Noise Level	39 dB
Lamp Life	2000 hours (Normal), 4000 hours (Eco)

Summary

NEC Projector Setup and Connectivity

Connection Methods

Details serial, USB, and LAN connection types for projector control.

Interface Conditions

Outlines requirements and standards for projector communication interfaces.

NEC Projector Command Reference

List of Commands

Provides a complete list of available projector control commands with their corresponding codes.

Command Protocol and Error Handling

Explains command structure, projector IDs, model codes, checksums, and response error codes.

Image and Parameter Adjustment Commands

Covers commands for adjusting gain, volume, brightness, contrast, and image modes.

Information and Status Request Commands

Details commands for requesting projector information, lamp status, and operational states.