NEC NP-PA703UL - ❷ Making Connections; Analog RGB Signal Connection

141
6. Connecting to Other Equipment
❷ Making Connections
A computer cable, HDMI cable, or a DisplayPort cable can be used to connect to a computer.
Analog RGB signal connection
• Connect the computer cable to the monitor out terminal (mini D-sub 15 pin) on the computer and the computer
video input terminal on the projector. Please use a computer cable attached with a ferrite core.
• Select the source name for its appropriate input connector after turning on the projector.
Input connector INPUT button on the projector
cabinet
Button on the remote control
COMPUTER IN
4:COMPUTER
4/COMPUTER
COMPUTER IN
AUDIO IN
AUDIO OUT
Stereo mini-plug audio cable (not supplied)
NOTE:
• Please check the operating manual of the computer as
the name, position and direction of the terminal may
differ depending on the computer.
Computer cable (sold commercially)