NEC NP-PH1000U - Page 228

214
9. Appendix
4. Tightenthetwoscrewsonbothsidesoftheslot.
• Besuretotightenthescrews.
 Thiswillcompleteinstallationoftheoptionalboard.
 Refertotheuser’smanualincludedwiththeboardforsourceselection.
NOTE:
• Mountingtheoptionalboardmaycausethefanstoruninthestandbymodeforthepurposeofcoolingdependingontheoptional
board. The fan speed may also increase in order to cool the projector properly. Both of these instances are considered normal
and not a malfunction of the projector.