EasyManuals Logo

NEC NP-PX700W Specifications

NEC NP-PX700W
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
On a
green wall...
BEFORE
auto wall correction
AFTER
auto wall correction
Built-in wall color correction presets
These provide for adaptive color tone correction to display properly on non-white surfaces.
2500-hour filter life
NEC is committed to designing its products to provide
long lifecycles. This commitment even extends to
components within its products, including the improved
lter. This virtually maintenance-free
lter reduces the frequency at which
cleaning is required, thereby decreasing
your total cost of ownership. Filter
replacement is only required at the
time the lamp is replaced.
DESIGNED WITH THE ENVIRONMENT IN MIND
• Extended lamp life with ECO Mode™ technology increases lamp life up to 2500 hours, while lowering power consumption
• Power management enables projector to automatically turn off when an incoming signal is not detected from any of the inputs
• Auto Power On via the RGB (15-pin) input connector when a signal is detected from a computer
• Carbon savings meter calculates the positive effects of operating the projector in ECO Mode, which is encouraged by an optional
message at startup. A green ECO Mode button on the remote control makes the switch easy.
• Quick start (3 to 4 seconds) lets you begin presenting in seconds while quick shutdown (immediate power off with no cooling
required after shutdown) ensures efficient energy usage
• Sleep timer can be set to automatically turn off the projector at set countdown times
• Low power consumption (0.2W in stand-by mode) minimizes energy costs
• Direct power off provides instantaneous shutdown of the projector
Built-in stacking correction
The industry’s rst built-in stacking correction capabilities (up to four projectors) allows
the projectors to boost an image’s brightness up to 32,000 lumens, which is ideal
for larger-sized screens and environments with heavy ambient light. This feature also
prevents the complete loss of an image, which can happen when using only one projector.
PIP/Side-by-Side
This function allows two sources to
be displayed on the screen at one
time in either a picture-in-picture or
side-by-side conguration.
Edge blending
This function seamlessly blends
multiple projected images to display
a single high-resolution image.
Dual lamps
The PX Series features dual lamps,
providing up to 8000 lumens of
light output. You can combine
dual lamps for up to four dierent
light congurations (Normal Mode
with dual or single lamp and ECO
Mode with dual or single lamp) and
settings depending on the ambient
lighting conditions.
BUILT-IN SOFTWARE

Other manuals for NEC NP-PX700W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NEC NP-PX700W and is the answer not in the manual?

NEC NP-PX700W Specifications

General IconGeneral
Matrix size0.65 \
Native aspect ratio-
Projection distance0.8 - 54.8 m
Vertical scan range48 - 120 Hz
Horizontal scan range15 - 108 kHz
Projection technologyDLP
Contrast ratio (typical)2100:1
Screen size compatibility50 - 300 \
Projector native resolutionWXGA (1280x800)
Keystone correction, vertical- 30 - 30 °
Keystone correction, horizontal- 40 - 40 °
Focal length range26 - 117.4 mm
Aperture range (F-F)1.7 - 3.1
Vertical lens shift range-50 - 50 %
Horizontal lens shift range-10 - 10 %
Lamp power400 W
Lamps quantity1 lamp(s)
Light source typeLamp
Lamp power (economic mode)320 W
Service life of light source2000 h
Service life of light source (economic mode)2500 h
Full HDNo
Supported video modes1080i, 1080p, 480i, 480p, 576i, 576p, 720p
Analog signal format systemNTSC, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM
Supported graphics resolutions1024 x 768 (XGA), 1280 x 1024 (SXGA), 1400 x 1050 (SXGA+), 1600 x 1200 (UXGA), 1920 x 1200 (WUXGA), 640 x 480 (VGA), 800 x 600 (SVGA)
Audio (L/R) in0
BNC input ports5
USB connector typeUSB Type-A
Serial interface typeRS-232
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Progressive scan outputYes
VGA (D-Sub) ports quantity3
Optical disc player typeNot included
Noise level43 dB
CertificationUSA: UL60950-1, FCC Part15 Class B, Canada: CSA60950-1, ICES-003 Class B
Noise level (economic mode)39 dB
PlacementDesktop
Product typeLarge venue projector
Product colorBlack
Power sourceAC
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)33 W
Power consumption (typical)1006 W
Storage temperature (T-T)-10 - 50 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)20 - 80 %
Remote control typeIR
Weight and Dimensions IconWeight and Dimensions
Depth516 mm
Width504 mm
Height192 mm
Weight19700 g

Related product manuals